----------
From: 	Hernan Jaramillo
Sent: 	Wednesday, January 15, 1997 4:57 PM
To: 	[log in to unmask]
Subject: 	FW: Panelization Software (fwd)


We offer two products that do panelization as well as other manufacturing tasks like drilling, milling, venting, copper area, etc. This two products belong to the CAM350 Family and are called ECAM-II and CAM350.
Please take a look at our web page at http://www.ecam.com for more information and call 1800-535-3226 to get a 15 day "Time Access Code"  free of charge.

----------
From: 	Isaac Stringer
Sent: 	Saturday, January 11, 1997 1:32 PM
To: 	Hernan Jaramillo
Subject: 	FAB: Panelization Software (fwd)

Forwarded message:
>From [log in to unmask] Fri Jan 10 19:49:49 1997
Resent-Date: Fri, 10 Jan 1997 21:36:04 -0800
Resent-Sender: [log in to unmask]
Old-Return-Path: <[log in to unmask]>
Message-Id: <[log in to unmask]>
From: "John Parsons" <[log in to unmask]>
To: "IPC TechNet" <[log in to unmask]>
Subject: FAB: Panelization Software
Date: Fri, 10 Jan 1997 14:18:29 -0800
X-MSMail-Priority: Normal
X-Priority: 3
X-Mailer: Microsoft Internet Mail 4.70.1155
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
Resent-Message-ID: <"heZu43.0.A_H.gthro"@ipc>
Resent-From: [log in to unmask]
X-Mailing-List: <[log in to unmask]> archive/latest/9137
X-Loop: [log in to unmask]
Precedence: list
Resent-Sender: [log in to unmask]

I have just received some information on stand-alone panelization software
know as "KwickFit" from MicroMega Solutions.  Is anyone aware of other
stand-alone panelization software.

Regards

John Parsons
Pre-Production Engineering
Circuit Graphics Ltd.
8070 Winston St.
Burnaby, BC. Canada
V5A 2H5
Phone: (604) 420-3313
Fax: (604) 420-7525

Visit Us on the WEB @ http://www.cirgraph.com

***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to:           *
* [log in to unmask] with <subject: unsubscribe> and no text.        *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact   *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************







Andy Channing
Advanced CAM Technologies, Inc.
16450 Los Gatos Blvd. , Suite 110
Los Gatos, CA. 95032
Ph: (408) 358-4680 x103 - Fx: (408) 358-4691
e-mail:[log in to unmask]
Visit us at www.ecam.com

***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to:           *
* [log in to unmask] with <subject: unsubscribe> and no text.        *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact   *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************