TECHNET Archives

January 1997

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Date:
Mon, 13 Jan 97 14:15:31 EST
Content-Type:
text/plain
Parts/Attachments:
text/plain (22 lines)
          There is an inherent difference between LPI and dry film
          soldermask, in that dry film mask is three-dimensional.  LPI
          mask floods the board, whereas dry film leaves triangulated
          pockets along the edge of surface features.  It is these
          pockets where solution entrapment occurs.  This is why the
          cleanliness numbers aren't as good with dry film mask.
          Tom Coyle
          Field Services Engineer
          HADCO Corporation

***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to:           *
* [log in to unmask] with <subject: unsubscribe> and no text.        *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact   *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************



ATOM RSS1 RSS2