Steve:There quite a few dispense equipment supliers out there.The 
prices can very greatly depending on such things as positioning accuracy,	
 motion control,proportioning/mixing,dispense speed etc.Liquid Contol Corp.	
 North Canton Ohio(216)494-1313 makes a fairly rugged system at a middle of  
 the road price.This uses a positive rod displacement metering system that 
can be used for single and plural component materials with a wide range of   
 mixing ratios.It also can be integrated with a two or three axis coordinated	
 dispense motion system.						
						Regards			
						Michael Barmuta		
						Staff Engineer		
						Fluke Corp.		
						Everett Wa.		
						(206)356-6076


On Thu, 9 Jan 1997 07:07:51 -0800 Steve Sekanina wrote:

> From: Steve Sekanina <[log in to unmask]>
> Date: Thu, 9 Jan 1997 07:07:51 -0800
> Subject: Adhesive applicatiion equipment on flex rigid boards.
> To: "INTERNET:[log in to unmask]" <[log in to unmask]>
> 
>      Does anyone know of any,  or currently use any adhesive application 
> equipment for applying to the flex/rigid  interface of boards other 
> than simple air powered syringe type equipment that you use by hand?  
> We interested in finding something that would be a bit more automated. 
> Any suggestions would be appreciated.  Thank you.
> 
> ***************************************************************************
> * TechNet mail list is provided as a service by IPC using SmartList v3.05 *
> ***************************************************************************
> * To unsubscribe from this list at any time, send a message to:           *
> * [log in to unmask] with <subject: unsubscribe> and no text.        *
> ***************************************************************************
> * If you are having a problem with the IPC TechNet forum please contact   *
> * Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
> ***************************************************************************
> 



***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to:           *
* [log in to unmask] with <subject: unsubscribe> and no text.        *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact   *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************