Subject: | |
From: | |
Date: | Wed, 08 Jan 97 16:25:22 cst |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Really????
No catalyst on the PTH line?
No alkaline etchant?
No reflow/HASL flux?
Need I go on?
It may be that this is not their fault. However, they have a VERY
unique board shop if they don't use one or more of these processes. I
suggest they could be more cooperative in helping to get to the root
of the problem.
Dave Sullivan
Rockwell Collins, Inc.
[log in to unmask]
______________________________ Reply Separator _________________________________
Subject: ASSEM: Copper Choride problem
Author: [log in to unmask] at ccmgw1
Date: 1/8/97 8:02 AM
Hi,
Recently we encountered some assembled PCB returned from the
field where humidity is high and temp is low. Some vias and pads
were found to be corroded with copper chloride after SEM analysis
and when corrosion production were removed from the board, the
affected part of the vias was degraded. This has greatly
affected the performance of the circuit.
The fabrication house claimed that they are not liable as there
was not chloride
chemical used in their processes.
Does anyone has any insights to share? Could the assembly
process contribute to
this corrosion?
Thanks in advance for any information shared.
stella yap
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
Received: from by ccmgw1.cacd.rockwell.com (SMTPLINK V2.11)
; Wed, 08 Jan 97 08:02:20 cst
Return-Path: <[log in to unmask]>
Received: from stealth.cacd.rockwell.com (stealth) by mailserv with ESMTP
(1.40.112.8/16.2) id AA002030838; Wed, 8 Jan 1997 02:07:18 -0600
Received: by stealth.cacd.rockwell.com; id CAA25923; Wed, 8 Jan 1997 02:07:22 -0600
Received: from ipc.org(168.113.24.64) by stealth via smap (V3.1.1)
id xma025921; Wed, 8 Jan 97 02:06:59 -0600
Received: from ipc.org by simon.ipc.org via SMTP (940816.SGI.8.6.9/940406.SGI)
id BAA07813; Wed, 8 Jan 1997 01:58:24 -0800
Resent-Date: Wed, 8 Jan 1997 01:58:24 -0800
Received: by ipc.org (Smail3.1.28.1 #2)
id m0vhssK-0000SBC; Wed, 8 Jan 97 01:56 CST
Resent-Sender: [log in to unmask]
Old-Return-Path: <es500yap@pts7>
Date: Wed, 8 Jan 1997 16:00:07 +0800
From: [log in to unmask] ( YAP CHOW LAN)
Message-Id: <[log in to unmask]>
To: [log in to unmask]
Subject: ASSEM: Copper Choride problem
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Md5: lhd0uu5MiHDmLWRELG6qqw==
Resent-Message-Id: <"2cjg-3.0.Q_6.rCrqo"@ipc>
Resent-From: [log in to unmask]
X-Mailing-List: <[log in to unmask]> archive/latest/9043
X-Loop: [log in to unmask]
Precedence: list
Resent-Sender: [log in to unmask]
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|