Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0vmfJX-0000SBC; Tue, 21 Jan 97 06:28 CST |
Content-Type: |
text/plain; charset="us-ascii" |
Old-Return-Path: |
|
Date: |
Tue, 21 Jan 1997 20:37:44 +0800 |
Precedence: |
list |
Resent-From: |
|
Resent-Sender: |
|
X-Status: |
|
Status: |
O |
X-Mailing-List: |
|
X-Sender: |
|
TO: |
|
Return-Path: |
<TechNet-request> |
X-Loop: |
|
Resent-Message-ID: |
<"SDScm3.0.eHD.kPBvo"@ipc> |
Subject: |
|
From: |
|
From [log in to unmask] Tue Jan 21 13: |
09:48 1997 |
Mime-Version: |
1.0 |
X-Mailer: |
Windows Eudora Pro Version 2.1.2 |
Message-Id: |
|
Parts/Attachments: |
|
|
To all technet users ,
Recently a friend of mine encountered spot soldermask peeling on the
copper
area particularly more serious with 0.8mm/1.0mm laminate thickness and
especially
more pronounced with via hole panel.The abnormal case is the spot peeling
happened
sometimes on the top or bottom location of panel of either solder/component
side ,% on both top/bottom location of panel of solder/component side is low .
They are using brushing followed by chemical treatment for surface cleaning
running
at 1m/min .Can anyone please advise and help out on this . I suspect it to
be the
poor drying of the surface cleaning line but I need someone who are expert to
highlight on the following :-
In order to run at 1 to 1.5m/min , what should be
i.No of air knife be used/Special design needed
ii.Distance travelled in the drying chamber
iii.Volume of the hot air
iv.Temperature setting
Any feedbacks is welcome .Thanks .
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|