Subject: | |
From: | |
Date: | Thu, 23 Jan 1997 11:31:02 -0800 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
When using Epic LPI soldermask, clear color, our finished bare boards
have a slight "haze" left in the finish. We've been told by Dynachem
and some of our customers that this is normal and usually ends up
crystal clear after mass soldering. Other customers of ours query
the "cloudiness" or "haze" in the finish.
Any help substantiating the normality or abnormality of this
would be much appreciated.
Thanks....John Gordon
LANmark Circuits, Inc
(916)272-7280
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|