Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0vhHht-0000UmC; Mon, 6 Jan 97 10:15 CST |
Old-Return-Path: |
|
Date: |
Mon, 06 Jan 1997 10:28:07 -0600 |
Precedence: |
list |
Resent-From: |
|
Resent-Sender: |
|
X-Status: |
|
Status: |
O |
X-Mailing-List: |
|
TO: |
|
From [log in to unmask] Mon Jan 6 10: |
44:27 1997 |
Resent-Message-ID: |
<"vKetn3.0.w7M.RKIqo"@ipc> |
Subject: |
|
From: |
|
Return-Path: |
<TechNet-request> |
X-Loop: |
|
X-Mailer: |
Novell GroupWise 4.1 |
Message-Id: |
|
Parts/Attachments: |
|
|
The question of, "do we consider the aspect ratio to be from the plated
hole or the drilled hole?" I called my vendor, Holaday Circuits Inc. and
asked the question fully expecting the answer, "from the nominal plated
hole", to my surprise it was the opposite! My sales engineer said that
they look at the aspect ratio to the drilled hole! Yeppieee! we have more
room!
Dan Lorinser
BFGoodrich Aerospace
Burnsville,MN
[log in to unmask]
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|