TECHNET Archives

January 1997

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Received:
by ipc.org (Smail3.1.28.1 #2) id m0vnTs9-0000XVC; Thu, 23 Jan 97 12:27 CST
Old-Return-Path:
<[log in to unmask]>
Date:
Thu, 23 Jan 97 19:36:33 PST
Precedence:
list
Resent-From:
[log in to unmask]
Resent-Sender:
TechNet-request [log in to unmask]
X-Status:
Status:
O
X-Mailing-List:
<[log in to unmask]> archive/latest/9545
From [log in to unmask] Thu Jan 23 14:
37:49 1997
TO:
[log in to unmask]
Return-Path:
<TechNet-request>
Resent-Message-ID:
<"G50E11.0.BNI.Nswvo"@ipc>
Subject:
assy: Press In
From:
[log in to unmask]
X-Loop:
[log in to unmask]
X-Mailer:
SelectMAIL 1.2
Message-Id:
<[log in to unmask]>
Parts/Attachments:
text/plain (26 lines) 
Hello all,

Are there any experience from connector Press In technology used in backplanes 
(~14 layers) TOGETHER with SMT components (thick film resistors 7x2 mm) close 
to the connector.
My worries are component and/or solder joint cracking.

Thanks

Hans Bogren
Ericsson Telecom

 

***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to:           *
* [log in to unmask] with <subject: unsubscribe> and no text.        *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact   *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************

ATOM RSS1 RSS2