Mime-Version: |
1.0 |
Content-Type: |
text/plain; charset=us-ascii |
References: |
|
Date: |
Wed, 22 Jan 1997 12:02:36 -0500 |
From [log in to unmask] Thu Jan 23 13: |
56:22 1997 |
Precedence: |
list |
Resent-From: |
|
Resent-Sender: |
|
X-Status: |
|
Status: |
O |
X-Mailing-List: |
|
TO: |
|
Return-Path: |
<TechNet-request> |
X-Loop: |
|
Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0vn5rp-0000YAC; Wed, 22 Jan 97 10:49 CST |
Resent-Message-ID: |
<"jKP0E1.0.lAF.ZKavo"@ipc> |
Subject: |
|
From: |
|
Old-Return-Path: |
|
In-Reply-To: |
Steve Collins < [log in to unmask]>
"Re: Trace Damage from Breakaway Holes" (Jan 22, 8:25am) |
X-Mailer: |
Z-Mail 4.0.1 (4.0.1 Apr 9 1996) |
Message-Id: |
<970122120238.ZM4255@ucpc206> |
Parts/Attachments: |
|
|
On Jan 22, 8:25am, Steve Collins wrote:
> Subject: Re: Trace Damage from Breakaway Holes
> Robert Cronin wrote:
[snip]
> > Bob Cronin
> > Eastman Kodak
>
> Bob, Just a suggestion for your production people would be to switch
> from actually breaking parts out of panel to using pnumatic shears to
> cut the board out. I have used this methode in a past life with a
great
> deal of success.
>
Bob, Steve
In a past life, the pnumatic ram would "pop" and jar the board at the
end of the cut, sometimes causing problems. Switching to a hydrolic ram
fixed that problem. Since the hydrolic oil is non compressable, we got
a very even, smooth cut.
George Franck
--
George Franck Jr
Raytheon E-Systems
Falls Church Va.
"The opinions expressed are those of the author, and are not necessarily those of the Raytheon Corporation."
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|