Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0vlJ8G-0000WGC; Fri, 17 Jan 97 12:35 CST |
Old-Return-Path: |
|
Date: |
Fri, 17 Jan 1997 11:04:49 -0700 |
Precedence: |
list |
Resent-From: |
|
Resent-Sender: |
|
X-Status: |
|
Status: |
O |
X-Mailing-List: |
|
TO: |
|
Return-Path: |
<TechNet-request> |
Resent-Message-ID: |
<"k7k2m2.0.HdC.ZPyto"@ipc> |
Subject: |
|
From: |
|
X-Loop: |
|
X-Sun-Charset: |
US-ASCII |
From [log in to unmask] Fri Jan 17 16: |
43:26 1997 |
Message-Id: |
|
Parts/Attachments: |
|
|
[log in to unmask] asked,
QUICK QUESTION?
Are there any standards or design guidelines for Press Fit connector?
********************* Yes there are *******************
AMP specs the holes for their "action pins" pretty tightly. I'd guess
other press-fit connector vendors do likewise.
AMP's spec on one of their pin sizes, for instance is:
drilled hole dia. PTH dia.
=================== ===============
.0453+/-.001" .037"-.043"
They spec the copper plating thickness in the hole at .001-.003"
and the tin-lead at .0003 min.
Gary P.
---
Gary D. Peterson
_/_/_/ _/ _/ _/ SANDIA NATIONAL LABORATORIES _/_/_/
_/ _/_/ _/ _/ P.O. Box 5800, M/S 0503 _/_/
_/_/_/ _/ _/ _/ _/ Albuquerque, NM 87185-0503 _/_/_/_/_/_/
_/ _/ _/_/ _/ Phone: (505)844-6980 _/ _/_/ _/
_/_/_/ _/ _/ _/_/_/_/ FAX: (505)844-2925 _/ _/_/ _/
E-Mail: [log in to unmask] _/_/_/
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|