A customer currently has a ceramic board manufactured off shore and he is
looking to redesign it and have it made "locally". It is a ceramic board
which has an aluminum oxide coating on one side. This coating must be very
thin and highly resistant to abrasion as well as being non-conductive.
Contacts under the coating are wiped with a sensor.
He is looking for an alternative to the ceramic/aluminum oxide combination.
Can anyone help?
Regards
John Parsons
Pre-Production Engineering
Circuit Graphics Ltd.
8070 Winston St.
Burnaby, BC. Canada
V5A 2H5
Phone: (604) 420-3313
Fax: (604) 420-7525
Visit Us on the WEB @ http://www.cirgraph.com
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************