Mime-Version: |
1.0 |
Content-Type: |
text/plain; charset="iso-8859-1" |
Old-Return-Path: |
|
Date: |
Sat, 11 Jan 1997 12:42:46 +0100 |
Precedence: |
list |
Resent-From: |
|
Resent-Sender: |
|
Content-Transfer-Encoding: |
quoted-printable |
Status: |
O |
X-Mailing-List: |
|
X-Sender: |
|
TO: |
|
Return-Path: |
<TechNet-request> |
X-Status: |
|
X-Loop: |
|
Resent-Message-ID: |
<"EusWL3.0.Mt6.lgtro"@ipc> |
Subject: |
|
From: |
|
From [log in to unmask] Sun Jan 12 10: |
06:04 1997 |
Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0vj1hQ-0000GTC; Sat, 11 Jan 97 05:34 CST |
X-Mailer: |
Windows Eudora Light Versión 1.5.2 |
Message-Id: |
|
Parts/Attachments: |
|
|
At 10:09 10/01/97, you wrote:
>
>Can anyone help?
>We are using kester 951 low residue flux in a dual wave solder process for
>mixed technology.
> What would you recommend for a temperature profile and what solder temp. is
>recommended for this product.
>we have been experiencing skips or no solders on the SMT components.
>Any help would be greatly appreciated.
>
=========================================================================
Dear Raymond,
It seems that you are talking about a low residual flux.
Don't worry about it,
Try to preheat at 120ºC in the circuit. and solder at wave bath temperature
arround 240-250ºC.
If you have and old machine, prepared only for colophone fluxes, and you
can't get the 120ºC required. Try to improvise a close tunnel in the
preheating zone, in order to increase this temperature, due to refractation.
If you need more information, please contact me by E-mail or Fax (here enclosed)
Best regards
- -
( O O )
========oOOo===\o/===oOOo=========
= ANTONI CHERTA =
= E-mail: [log in to unmask] =
= Fax: +34.3.274.00.80 =
= BARCELONA =
==================================
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|