Subject: | |
From: | |
Date: | Fri, 23 Feb 96 10:21:04 -0800 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hello,
You might try a company called Guerreo in Woodland Hills, CA.
Talk to Andrew, (818)703-8890. He might still have an old Gerber PC800
still operating which should be able to read the 8" floppies.
Regards,
Denis Mori
Hewlett-Packard Co.
Roseville, CA
[log in to unmask]
______________________________ Forward Header __________________________________
Subject: 8 inch Floppies
Author: Non-HP-gfranck ([log in to unmask]) at HP-Roseville,mimegw1
Date: 2/23/96 6:55 AM
As the originator of the "8 inch Floppies" question, I failed to
communicate the correct question. Let me try again.
We have data on an 8" disks. We do not have an 8" disk drive. The drive
was on some old Gerber layout system, which was pushed over the cliff many
years ago.
Before we got rid of the equipment, an incomplete transfer of data occured.
Enough data was transferred so that everyone got a warm feeling that
everything got transferred, but alas, not so.
So, here I am, with these two 8" floppies, an anxious Management, and a PWB
requirement. (Buying the boards where we bought them before is not an
option)
My trusty board suppliers can not read 8" disk. SO.....
How do I get the data off the 8" floppy to my supplier so he can make
boards? Any Ideas?
Thanks for the input so far. You really make technet a valuable source.
====================================================================
George Franck
PWB Product Assurance Phone (703) 560-5000 x2648
E-Systems M/S N408 Fax (703) 280-4613
7700 Arlington Blvd E-Mail: [log in to unmask]
Falls Church Va 22046 E-Mail: [log in to unmask]
====================================================================
.......................................................................
FROM: Non-HP-gfranck/HP-Roseville_mimegw1////////HPMEXT1/gfranck#a#melpar#f#esys#f#com@venus
TO: Non-HP-technet/HP-Roseville_mimegw1////////HPMEXT1/technet#a#ipc#f#org@venus
|
|
|