Here is the programme for the OnBoard Free Seminars in London on 18-19 September
you may not be able to attend but you colleague may be able to visit the Show
and seminars so pass the Email on:

Draft Two Day OnBOARD Seminar Program
Wednesday 18th September 
Modern Competitive Design for Manufacture

11.00am 	Component Packaging for year 2000
		Peter Wright - D2D

12.00am 	PCB Design to Manufacture - 
		Bill Green Engineering Manager - Surtech Interconnection

1.00pm 	Implementing Modern Technology 
		Peter Grundy - DEK
 
2.00pm 	Design Rules for Fine Pitch and Ball Grid Array
		Bob Willis - Electronic Presentation Services

3.00pm	Chip On Board and Encapsulation - A Practical Introduction
		Peter Swanson - Intertronics

Manufacturing Today and Tomorrow
Thursday 19th September

11.00am	Conductive Adhesive to Eliminate Solder
		Peter Ongley - Alpha Metals

12.00am 	Printing Ultra Fine Pitch Don McPhail - SMTech Ltd

1.00pm 	Reflow Soldering Ball Grid Array and Fine Pitch 
		Alan Weston General Manager - Electrovert UK Ltd

2.00pm 	Automatic Inspection for Fine Pitch and BGA
		Hans-Walter Gillmann Hewlett Packard

3.00pm	Rework and Repair of Ball Grid Array
		Andrew Clarke - Automation Limited

Each presentation will be between 30-40 minutes. This will allow time for
questions and discussion prior to the next presentation.

Contact for booking places is Kay Diggens Fax: 01799 528268  Tel: 01799 528292

Bob Willis
OnBoard Seminar Coordinator

Home Page: http://ourworld.compuserve.com/homepages/bwillis
Email: [log in to unmask]


***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to:           *
* [log in to unmask] with <subject: unsubscribe> and no text.        *
***************************************************************************