Mime-Version: |
1.0 |
Content-Type: |
text/plain;
charset=US-ASCII |
Old-Return-Path: |
|
Date: |
Tue, 17 Dec 96 16:50:48 PST |
Precedence: |
list |
Resent-From: |
|
Resent-Sender: |
|
X-Status: |
|
Status: |
O |
X-Mailing-List: |
|
TO: |
|
Return-Path: |
<TechNet-request> |
X-Loop: |
|
Resent-Message-ID: |
<"OCfiC3.0.k8C.1Jqjo"@ipc> |
Subject: |
|
X-Priority: |
3 (Normal) |
From [log in to unmask] Wed Dec 18 08: |
23:32 1996 |
Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0vaAYW-0000S6C; Tue, 17 Dec 96 19:12 CST |
From: |
|
Message-Id: |
|
Parts/Attachments: |
|
|
[log in to unmask] (James Edwards) Wrote:
|
| Could someone tell me the advantages of using Gold/NI vs HASL
| and
| what are the common (if any) process problems I may encounter
| when
| screening/placing parts/soldering to these type boards using
| 63/37 eutectic solder paste? Any wave solder issues? Thanks
James,
The August 1995 edition of Electronic Packaging & Production has a paper
titled as "Alternatives to HASL: A Uer's Guide For Surface Finishes",
which gives a pretty summary on alternative PCB surface technology,
including Ni/Au. It also include a comparison chart for HASL, Ni/Au, OSP,
Matte Tin in terms of fine pitch capability, electrical contact, cost and
etc.
Qun Xiao
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|