 
| Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0ueK4M-0000D7C; Thu, 11 Jul 96 06:38 CDT |
| Old-Return-Path: |
|
| Date: |
11 Jul 96 07:44:05 EDT |
| Precedence: |
list |
| Resent-From: |
|
| Resent-Sender: |
|
| X-Status: |
|
| Status: |
O |
| X-Mailing-List: |
|
| TO: |
|
| Return-Path: |
<TechNet-request> |
| Resent-Message-ID: |
<"14cQD.0.YTD.TUEvn"@ipc> |
| Subject: |
|
| From: |
|
| From [log in to unmask] Thu Jul 11 13: |
27:51 1996 |
| X-Loop: |
|
| Message-ID: |
|
| Parts/Attachments: |
|
|
If you dont specified the solder thickness on the PCB or have the incorrect land
size for the lead you will result in a low fillet. You will tend to find with
very fine pitch there will be a lack of a fillet on the toe and heel. This in
the real world.
Bob Willis
Electronic Presentation Services
2 Fourth Avenue, Chelmsford, Essex CM1 4HA. England.
Tel: (44) 01245 351502
Fax: (44) 01245 496123
Home Page: http://ourworld.compuserve.com/homepages/bwillis
Email: [log in to unmask]
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
|
|
|
