Subject: | |
From: | |
Date: | Tue, 6 Aug 96 15:48:44 EST |
Content-Type: | TEXT/PLAIN |
Parts/Attachments: |
|
|
>We appreciate your Feedback Mr. Anderson, one more question, what is
>your surface prep (predip) prior to Tin plating.
>Regards / Wolfgang.
Wolfgang;
>From Nickel we have dragout rinses followed by a spray rinse, then
to a 10% sulfuric pre-dip before Tin plate. After copper plate we
also have a light microetch before the Nickel to eliminate the
possibility of peeling at the Cu/Ni interface.
Regards
George
----------------------------------------------------------------
Uvonics Co. Inc. [log in to unmask]
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
|
|
|