Subject: | |
From: | |
Date: | 11 Jul 96 07:44:05 EDT |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
If you dont specified the solder thickness on the PCB or have the incorrect land
size for the lead you will result in a low fillet. You will tend to find with
very fine pitch there will be a lack of a fillet on the toe and heel. This in
the real world.
Bob Willis
Electronic Presentation Services
2 Fourth Avenue, Chelmsford, Essex CM1 4HA. England.
Tel: (44) 01245 351502
Fax: (44) 01245 496123
Home Page: http://ourworld.compuserve.com/homepages/bwillis
Email: [log in to unmask]
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
|
|
|