Subject: | |
From: | |
Date: | Fri, 31 May 1996 16:54:27 -0400 (EDT) |
Content-Type: | TEXT/PLAIN |
Parts/Attachments: |
|
|
I apologize for sending out the earlier message with the last sentence
incomplete...
> I have a requirement to enclose an 8.0"x5.50"x0.062" circuit card
> assembly (CCA). I'm looking for a ABS plastic (preferred) or metal
> "off-the-shelf" enclosure to house this product. CCA connectors & status
> LED's are located on both 8.0" sides of the CCA. Consequently, enclosure
> openings must coincide with the 8.0" CCA dimension. Custom front/rear
> panels are required for connectors/LED's. CCA outline/mounting hole
> locations are subject to enclosure design. Would prefer a slightly larger
> enclosure than smaller (based on 8.0"x5.50" outline). I would
appreciate any leads to suppliers who have products that may fill this
need. Thank you.
>
|
|
|