Subject: | |
From: | |
Date: | Wed, 22 Jan 1997 13:32:52 -0600 (CST) |
Content-Type: | TEXT/PLAIN |
Parts/Attachments: |
|
|
Bob, I would use what you are most comfortable with. If you have not had
the time to review the details of 6011 and 6012 you could be buying
trouble (e.g. you may need an additional note on the drawing that you
didn't need before). In addition 2221/2222 are not final yet so you
would be calling out a proposal which could still be changed.
So I would recommend staying the course until 2221/2222 is published and
then reviewing both sets carefully before calling out new spex.
Regards
Dave Bergman
On Wed, 22 Jan 1997 [log in to unmask] wrote:
>
> Dan, George, ETC....
>
> I also have this same question. I am going to release new designs
> to fab and build. So what specs should I be using as the guidelines for
> design, build and assembly? IPC-275 or IPC-2222/2221 and IPC-276 or
> IPC-6011/12??? ETC. Hey guys, I only work here...How about some
> guidence!!! Thanks for any help.
>
> BVAN
> Bob Vanech
> Norden Systems
>
> ***************************************************************************
> * The mail list is provided as a service by IPC using SmartList v3.05 *
> ***************************************************************************
> * To unsubscribe from this list at any time, send a message to: *
> * [log in to unmask] with <subject: unsubscribe> and no text.*
> ***************************************************************************
> * If you are having a problem with the DesignerCouncil, please contact *
> * Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
> ***************************************************************************
>
>
***************************************************************************
* The mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text.*
***************************************************************************
* If you are having a problem with the DesignerCouncil, please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|