DESIGNERCOUNCIL Archives

1996

DesignerCouncil@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Dieter Bergman <[log in to unmask]>
Date:
Thu, 15 Feb 1996 12:25:28 -0600 (CST)
Content-Type:
TEXT/PLAIN
Parts/Attachments:
TEXT/PLAIN (41 lines)

The following question is one that was provided by designers for
the "A" basic level exam. It is NOT included in the final published
test and is for reference only. The topic is Transforming a
Schematic or logic Diagram.

*************************************************************

124  What are the characteristics of a connector with a "P" type
reference designator? 

     A.   fixed 
     B.   movable
     C.   male pinned
     D.   female pinned
          
     
select the most correct answer
     
     *********************************************************
Previous QOD

123  If analog circuits are restricted to the center of the board,
what is the effect of placing a power supply in the connector zone,
below the analog circuits? 


          B.   the heat from the power supply causes instability

Resource: IPC-T-50 Specific Terms; IPC-D-275 para 3.5.5, 3.5.6,
3.6; figure 3-11.

*********************************************************

Please send comments, constructive critique, or suggestions to Lisa
Williams at [log in to unmask] 

Dieter Bergman



ATOM RSS1 RSS2