DESIGNERCOUNCIL Archives

1996

DesignerCouncil@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Date:
Mon, 30 Sep 1996 08:56:54 -0600
Content-Type:
multipart/mixed
Parts/Attachments:
text/plain (542 bytes) , text/plain (596 bytes)


  Tooling pins are usually accurately dimensioned. Therefore, IMHO, you
  would want your tooling hole
  as large as, but never smaller than, the pin itself. In my personal
  experience we have called out a
  +.003/-.000 in. hole so it would always drop down on the pins without
  needing any extra force.

  There are also those situations where the pins are fully tapered. In
  those cases, it doesn't make much
  difference how the holes are toleranced as long as they do not get to be
  larger that the fattest portion
  of the pins.

  Hope this helps.



  Do any know witch is the tolerance for a tooling hole (for PCB/fixture   alignment)?   +0.003/-0.000in or +0.002/-0.001in.   Thanks   ****************************************************************************   * The mail list is provided as a service by IPC using SmartList v3.05 *   ****************************************************************************   * To unsubscribe from this list at any time, send a message to: *   * [log in to unmask] with <subject: unsubscribe> and no text. *   ****************************************************************************

ATOM RSS1 RSS2