> All the theoretical reason for doing or not doing are fine and dandy,
> and I respect Mr. Einarson very much, but the proof is in the pudding.
> If people are tieing visa directly to the plance and have not had
> problems, and indeed have increased the performance of their design,
> then we MUST take another look at why we do things. I believe that
> many of the things we do, and many of the rules of thumb we follow are
> legacy items - there may have been a good reason at one time, but
> technology has made the "reason" obsolete. This does not mean that I
> do or do not advocate this particular item (I have asked the editors
> of PC Fabrication and Circuits Assembly to comment on this via issue),
> but that if there is something that seems to work, we should look at
> it and ask questions.
> I will be glad to put this particular issue on the schedule for one of
> PCD's projects in early '97, ie. have several shops build a board with
> via tied straignt to the gnd or pwr plane, run it over a wave etc. and
> see what happens. As Lee Ritchey says "don't believe it just because
> someone says so, ask for physicl proof.)
>
> Pete Waddell
*
DITTO! Very well put Pete. I can't encourage everyone enough, if you want the
latest scoop on high-speed design related issues, please attend a Lee Richey or
James Blankenhorn (SMT Plus) course. There should be one coming up at the PCB
Design Conference, East Coast. Old design practices are out-dated when it comes
to high-speed design (>100Mhz).
Sincerely,
Mitch Morey
Sr. PCB Designer
TRW, Inc.
Redondo Beach, CA 90278
Phone: (310)814-5765
Fax: (310)812-4949
EMAIL: [log in to unmask]
|||||
((o o))
____________________________oOO_(_)_OOo_____________________________
PCB layout is like fine art. You have to DIE to be famous!
____________________________________________________________________
(_) (_)
****************************************************************************
* The mail list is provided as a service by IPC using SmartList v3.05 *
****************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
****************************************************************************
|