[log in to unmask][log in to unmask] > > IPC-D-275 figure 4-9 states to ocmes out from the component body 2 diameters but not less than 0.03 inch. to the biginning of the bend raduis. The bend raduis is determined by the lead diameter. up to 0.030 inch, R = 0.030. From 0.030 to 0.047 inch, [...][log in to unmask]
Your Best Bet is to contact P.C,design / Photoplotting Houses like
Custom Photo & Design and get input from them
They are located in Wallingford , CT.
1-203-265-3690
I know that they do have the scanning equiptment.
Bob Helwig