DESIGNERCOUNCIL Archives

1996

DesignerCouncil@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
"Mitch S. Morey" <[log in to unmask]>
Date:
Wed, 8 May 1996 11:11:32 -0700
Content-Type:
text/plain
Parts/Attachments:
text/plain (33 lines)

I'd also be interested in the microstrip model information

Mitch Morey
Sr. PCB Designer
TRW, Inc.
Redondo Beach, CA 90278
Phone: (310)814-5765
Fax:   (310)812-4949
EMAIL: [log in to unmask]

>      
>      I made a simple mathematical model of a stripline, 1 inch trace, on 
>      FR-4, nothing out of the ordinary as far as dimensions and found to my 
>      surprise a resonant freq at about 800 MHz with a 20 to 40 dB roll-off 
>      above 800 MHz
>      
>      Could someone in the RF/Microwave world of nuts and bolts pc board 
>      design tell me what I'm supposed to do at say 10 GHz with regular pc 
>      board materials/construction/fabrication???
>      
>      Thanks in advance, Doug McKean

Ken wrote back:
> Actually this is the type of discussion I'd like to see on this forum.
> Ken Barrett
> Cisco Systems
> San Jose CA.
> [log in to unmask]
> 



ATOM RSS1 RSS2