Chris,
This is the first that I've heard of this. I have many Qs as to how they
do this technically. I will relay to some of our technical folk to see if they
know or have heard of this.
BIG PROBLEM - I checked my 2/24/97 messages, and this message from Marc
was NOT there. I know that ComplianceNet is not used much at all, and the last
time I used it there was an error message, which was explained as a user who had
dropped off. But my main concern is that we have a great communications tool for
EHS folk, but we're not using it!! I' going to cc this to compliancenet to see
if it gets out to anyone, and whether those receiving it can recall this message
Lee
______________________________ Reply Separator _________________________________
Subject: "improved etching" (fwd)
Author: Christopher Rhodes <[log in to unmask]> at SMTPLINK-HADCO
Date: 3/18/97 3:50 PM
I haven't heard about this, and saw no reply bounce back from
compliancenet. Does anyone have any information for Dr. Siegel?
---------- Forwarded message ----------
Date: Mon, 24 Feb 1997 13:19:03 -0800
From: Marc H. Siegel <[log in to unmask]>
To: [log in to unmask]
Subject: "improved etching"
Laura Bloch at EPA Region IX forwarded me the following request. Does
anyone have an information about this?
"....During one of the discussions on printed circuit boards, it came
up that Japan may be already implementing this new technology of
"improved etching" in their PCB manufacture. Therefore, we wanted to ask
you if anyone at the EPA is aware of 1)whether such technique (i.e.
etching without needing etch-resist) is in use elsewhere, and if so, 2)
if there has been studies on the implications of P2 potential and risk
reduction resuling from implementing such technique.
Obviously, both of these questions are of great interest to us, and if
you woudln't mind asking a few who might know about these topics, we'd
love to hear from you as soon as possible."
Please send any information to:
Laura Bloch at:
[log in to unmask]
Thanks,
Marc
===================================================================
Dr. Marc H. Siegel
Western Region Pollution Prevention Network (WRPPN) Consultant
Engineering Process & Information Consulting
12397 Picrus Street
San Diego, CA 92129-4113
Phone: 619-484-9855
Fax: 619-484-9856
E-mail: [log in to unmask]
===================================================================
**************************************************************************
* The mail list is provided as a service by IPC using SmartList v3.05 *
**************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
**************************************************************************
* If you are having a problem with the ComplianceNet forum, please call *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
**************************************************************************
**************************************************************************
* The mail list is provided as a service by IPC using SmartList v3.05 *
**************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
**************************************************************************
* If you are having a problem with the ComplianceNet forum, please call *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
**************************************************************************
|
