Subject: | |
From: | |
Date: | Tue, 16 Apr 1996 13:04:07 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
We have just started using a dry film mask(Vacrel), which is about .003"
thick. We are using a .006" stencil and printing .020" pitch parts, and are
measuring paste thickness of about .009". We are using a metal squeegee,
but seeing some "dog ear" looks to the paste. We seem to be getting a poor
separation of paste from the stencil. The mask is about .0005" higher than
the pads. Our variation in paste height measurements on a board has
increased by .002" from Photo Imageable to dry film.
Are there any ideas on how to process a board with Vacrel to improve our
printing process?
Thanks for any ideas/suggestions.
Steve Quinn
Heurikon Corp
8310 Excelsior Dr
Madison, Wi 53717
[log in to unmask]
|
|
|