Subject: | |
From: | |
Date: | Wed, 18 Dec 1996 11:06:00 +0100 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Regarding Solderability of Au/Ni plate printed circuit boards
The solderability of Au/Ni plated boards depends on the properties of
two interfaces. The top gold layer and the interface between gold and
nickel. We have also found that copper is dark horse in this subject as
pointed out by Allen Hertz. It is not only copper in the nickel layer
that cause trouble the copper will also spread into the gold layer. We
published a paper at ISHEM Indian about this matter. We have observed
that the solderability correlate with the amount of copper in the gold
layer. For the moment we investigate this matter further and hopefully
we will have a open report available within a year.
Per Carlsson
IVF- The Swedish Institute of Production Engineering Research
Argongatan 30
S431 53 Molndal
SWEDEN
Tel Int+46 31 706 6142
Fax Int + 46 31 276130
email: [log in to unmask]
Kopia: [log in to unmask]; [log in to unmask]
Angående: ReÄ3Å: solderability test for ENIG PCB finish
Datum: den 16 december 1996 17.46
Hi Allen -
Did you publish your investigation results anywhere? The copper
issue
is something I hadn't thought of but it makes sense (it's something
I
look for in the future). The solderability/E.nickel paper I
referenced
did show that the Phosphorus content did make a difference - lower
phos contents had better solderability than higher phos contents.
Fang's conclusions agreed with one quoted reference(Feldstein) but
disagreed with a second reference (Shinohara). It would be
interesting
to compare your data with this published data to see what test
difference's appear.
Dave Hillman
Rockwell Collins
ddhillmaÉcacd.rockwell.com
______________________________ Reply Separator
_________________________________
Subject: ReÄ2Å: solderability test for ENIG PCB finish
Author: TechNetÉipc.org at ccmgw1
Date: 12/16/96 10:12 AM
Dave,
Very valid points!
Technet,
I would like to add one finding pertaining to solderability of
electroless
nickel - gold: Most have assumed the Phosphorus level is a major
contributor to
the solderability of this surface finish. Experiments completed in my
past
life
have demonstrated that the nickel application process removes a portion
of
the
copper, placing trace amounts of copper into the bath. Upon saturation,
the
copper is then re-depositied embedded in the nickel. The embedded copper
oxidizes, making the surface unsolderable. Varying the levels of
Phosphorus
did
not effect the solderability or yields during high volume experiments!
Allen Hertz
Racal-Datacom
allen_hertzÉusa.racal.com
________________________________________________________________________
____
___
Subject: Re: solderability test for ENIG PCB finish
Author: TechNetÉipc.org
Date: 12/15/96 12:04 PM
Good Morning TechNet!
Your method of conducting a solderability test should not change
just
because you are not using a tin/lead finish! I suggest using one of
the tests in ANSIJ-STD-003. With the emergence of the new
alternative
finishes (e.g. gold, silver, palladium) the specifications are
still
playing catch-up but the basic test methods are still applicable.
You
may need to change a dwell time because of dissolution rates (e.g.
palladium) or may want to use a different flux because of your
process
(e.g. OSP type finishes) - work with your pwb vendor to have an
acceptable test procedure both groups can use. I only have one
reference in my pile of papers that discusses the relationship of
solderability and E nickel but it's pretty good. Try:
"Factors Influencing Solderability Of Electroless Ni-P Deposits",
Jing
Fang, Plating & Surface Finishing, pages 44-47, July 1992.
Good Luck
Dave Hillman
Rockwell Collins
ddhillmaÉcacd.rockwell.com
______________________________ Reply Separator
_________________________________
Subject: solderability test for ENIG PCB finish
Author: TechNetÉipc.org at ccmgw1
Date: 12/13/96 10:44 PM
Dear Technetters,
What is a quick, easy & effective way of assessing
solderability/ wettability of a PCB with electroless nickel/immersion
gold
(ENIG) finish? How does phosphorus content in the Ni deposits affect
solderability? Will a lower %P content in Ni be more prone to
passivation/oxidation & thus affecting solderability??
************************************************************************
***
* TechNet mail list is provided as a service by IPC using SmartList
v3.05 *
************************************************************************
***
* To unsubscribe from this list at any time, send a message to:
*
* TechNet-requestÉipc.org with <subject: unsubscribe> and no text.
*
************************************************************************
***
* If you are having a problem with the IPC TechNet forum please contact
*
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at sklydmÉipc.org
*
************************************************************************
***
************************************************************************
***
* TechNet mail list is provided as a service by IPC using SmartList
v3.05 *
************************************************************************
***
* To unsubscribe from this list at any time, send a message to:
*
* TechNet-requestÉipc.org with <subject: unsubscribe> and no text.
*
************************************************************************
***
* If you are having a problem with the IPC TechNet forum please contact
*
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at sklydmÉipc.org
*
************************************************************************
***
************************************************************************
***
* TechNet mail list is provided as a service by IPC using SmartList
v3.05 *
************************************************************************
***
* To unsubscribe from this list at any time, send a message to:
*
* TechNet-requestÉipc.org with <subject: unsubscribe> and no text.
*
************************************************************************
***
* If you are having a problem with the IPC TechNet forum please contact
*
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at sklydmÉipc.org
*
************************************************************************
***
************************************************************************
***
* TechNet mail list is provided as a service by IPC using SmartList
v3.05 *
************************************************************************
***
* To unsubscribe from this list at any time, send a message to:
*
* TechNet-requestÉipc.org with <subject: unsubscribe> and no text.
*
************************************************************************
***
* If you are having a problem with the IPC TechNet forum please contact
*
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at sklydmÉipc.org
*
************************************************************************
***
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|