Subject: | |
From: | |
Date: | Mon, 9 Dec 1996 13:18:25 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
SMOBC
Funny, no one has thought to mention that it may be the
Fabricator's application for the defect. Is that not a
possibility?
______________________________ Reply Separator _________________________________
Subject: Re: Soldermask peeling
Author: [log in to unmask] at Internet
Date: 12/9/96 7:21 AM
Dan,
I'm going to ask what might be an obvious question, is it SMOBC (Soldermask
Over Bare Copper)? or did the surface layer get finished with tin/lead before
soldermasking the fab? The only time I've ever experienced mask coming off in
the wave was because of that. The plating is becoming liquidous and the mask
loses it's adhesion. That's kinda' the direction I'm leaning because you say
that the fab passes the tape test prior to wave.
Let us all know if you figure it out, I'm a bit curious why that might happen
if it isn't a plating beneath the mask.
__\/__
. / ^ _ \ .
|\| (o)(o) |/|
#------.OOOo----oo----oOOO.-----#
# Steve Gregory #
# [log in to unmask] #
# #
#________________Oooo.__________#
.oooO ( )
( ) ) /
\ ( (_/
\_)
>We recently experienced soldermask peeling after wave from three different
>Fabricators all within 2 weeks. Subsequently we took sample lots of each
>Fabricator and performed a pre-wave and post-wave tape test. In all lots
>the boards passed pre-wave tape test but had a 10-25% failure post wave.
>What can cause this phenomena? Does the weather change have anything to
do
>with soldermask application and durability?
>Dan Hickey
>Senior Buyer
>Vicor
>[log in to unmask]
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|