Subject: | |
From: | |
Date: | Tue, 19 Nov 1996 08:03:00 -0500 (EST) |
Content-Type: | TEXT/PLAIN |
Parts/Attachments: |
|
|
The reliability of your solder joints are related to the environment which the
assembly will see. The harsher the environment (thermal cycling) the more you
have to control the TCE mismatch. The way we do it is to hard bond two board
assemblies to both sides of a restraining core made of silicon carbide and
aluminum. I've measured the TCE of our bonded assembly and it is down to 7-8
ppm/degrees C. I've also thermally cycled a test BGA assembly while monitoring
the resistance through the solder joints and have exceeded 1500 thermal cycles
(-55 to +125 C) on a 1089 ceramic BGA, which confirmed our FEA (finite element
analysis).
My point is that you really cannot determine how reliable your design will be
without evaluating the situation, although, one could hypothesize that a 47mm
ceramic BGA on FR4 with any temperature variation will not last very long.
Jim Marsico
(516) 595-5879
[log in to unmask]
********************************
* ______ _ _ _____ *
* / ___ | | | | | _____ *
* / /___| | | | | | _____ *
* __/ ____ | | | | |______ *
* |____/ |_| |_| |________| *
* *
* SYSTEMS, INC. *
********************************
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
|
|
|