Subject: | |
From: | |
Reply To: | |
Date: | Mon, 11 Nov 1996 13:57:23 -0800 |
Content-Type: | TEXT/PLAIN |
Parts/Attachments: |
|
|
Allen: I've used a similar system to the one you desribed.It is a
Plexiglass chamber 9 cu ft with an internal humidty sensor wired to
an external controller and desiccated dehumidifier w/pump for $2-3K.
The controller/dehumidifier system is also available without the box
for about $1K less.Contact Cole-Parmer 1-800-323-4340.
Regards
Michael Barmuta
Staff Engineer
Fluke Corp.
Everett Wa.
(206)356-6076
On Mon, 11 Nov 1996 11:02:31 -0800 Allen Hertz wrote:
> From: Allen Hertz <[log in to unmask]>
> Date: Mon, 11 Nov 1996 11:02:31 -0800
> Subject: Dry Box Source?
> To: [log in to unmask]
>
> Fellow technetters:
>
> We have been trying to identify a source for a "dry box". The "Dry
> Box" is a plexiglass box (or set of boxes), usually a door in the
> front, optional shelving, and a flow controller operating off readings
> of relative humidity. The box is used for storing moisture sensative
> plastic packaged devices (BGA, QFP, etc.) to avoid moisture
> absorption. The controller is plumbed to a low humidity air source
> (dry air, Nitrogen, etc.). When the relative humidity readings rise
> above a preset limit, the controller flows some source gas.
>
> In searching, the closest we have come is "Blue M" which distributes a
> product called a "Dry box" but is actually a dryer, more on the lines
> of an oven. Blue M suggested lab equipment manufacturers.
>
> Any potential sources would be greatly appriciated.
>
> Thanks in advance,
> Allen Hertz
> Racal-Datacom, Sunrise, FL
> (954) 846-5829
> allen_ [log in to unmask]
>
> ***************************************************************************
> * TechNet mail list is provided as a service by IPC using SmartList v3.05 *
> ***************************************************************************
> * To unsubscribe from this list at any time, send a message to: *
> * [log in to unmask] with <subject: unsubscribe> and no text. *
> ***************************************************************************
>
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
|
|
|