Subject: | |
From: | |
Date: | Thu, 7 NOV 96 16:32:24 MST |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
For the .050" connector problems at the wave, you might also investigate a
nitrogen air knife on the wavesolder machine. Companies such as Electrovert
offer this option.
---------- Start of forwarded message ----------
Message# 458347
7-NOV-1996 13:12:56.85
From: [log in to unmask]
To: [log in to unmask]
Subj: RE: Soldering 50 mil connectors
Received: from micron.com by BOGEN2 Thu, 7 NOV 96 13:12:42 MDT
Received: from relay1.micron.com by micron.com (SMI-8.6/SMI-SVR4)
id NAA13660; Thu, 7 Nov 1996 13:12:37 -0700
Received: from simon.ipc.org (IPC.ORG [168.113.24.64]) by relay1.micron.com (8.7.5/8.7.3) with SMTP id MAA16709; Thu, 7 Nov 1996 12:
57:03 -0700 (MST)
Received: from ipc.org by simon.ipc.org via SMTP (940816.SGI.8.6.9/940406.SGI)
id OAA13367; Thu, 7 Nov 1996 14:01:33 -0800
Resent-Date: Thu, 7 Nov 1996 14:01:33 -0800
Received: by ipc.org (Smail3.1.28.1 #2)
id m0vLZvg-0000UGC; Thu, 7 Nov 96 13:15 CST
Resent-Sender: [log in to unmask]
Old-Return-Path: <[log in to unmask]>
Date: Thu, 07 Nov 96 14:19:15 EST
From: "Hollandsworth, Ron" <[log in to unmask]>
Message-Id: <[log in to unmask]>
To: [log in to unmask]
Subject: RE: Soldering 50 mil connectors
Resent-Message-ID: <"mqmHj.0.lA7.YLZWo"@ipc>
Resent-From: [log in to unmask]
X-Mailing-List: <[log in to unmask]> archive/latest/7510
X-Loop: [log in to unmask]
Precedence: list
Resent-Sender: [log in to unmask]
Some questions about your process on the 50 mil connector
soldering question.
1. What type machine do you have?
2. What is the direction of flow of the connector across
your wave solder machine? example: End first or side first.
3. Does one end of the 50 mil connector have a solder thief
to draw the solder away from the last two pins as the
connector leaves the solder wave?
4. Do you use any type of mask between the pins of the
connector to minimize or eliminate bridging.
5. Have you tried paste in hole?
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
|
|
|