Subject: | |
From: | |
Date: | Mon, 04 Nov 96 13:33:04 EST |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Technet people:
We are also in the process of switching to OSP and we are trying to
set up reliability testing. What are other assemblers doing to insure
product solderability, cleanliness, solder joint integrity, coating
thickness,etc. Any help would be appreciated.
Ron Yanuszewski
Cabletron Systems
______________________________ Reply Separator _________________________________
Subject: Entec 106
Author: [log in to unmask] at !INTERNET
Date: 11/4/96 12:54 PM
Jeffery Harry, would you please expand on the "major problems" you
have seen by running Entek 106 in a dip mode.
Peter Blokhuis
PC World
[log in to unmask]
----------------------------------------------------------------------
If you use Entec 106, make sure that the PCB supplier has an in-line
process. Dip tanks will cause major problems. Also the PCBS need to
be thoroughly dried before packaging. If not, you will have
solderability problems.
Jeffrey_Harry @ 3mail.3com.com@ ugate
----- Previous Message
----------------------------------------------------
To: Technet @ ipc.org @ UGATE
cc:
From: EHolton @ vines.etn.com @ UGATE Date: Thursday October 31,
1996 02:40 PM Subject: OSP Coating
----------------------------------------------------------------------
----------
----------------------------------------------------------------------
---------- ------------------------------
Fellow technetters:
My company is beginning its research into the wonderful world of
organic solderability preservative coatings. Our goal being to
implement this on the circuit boards in the near future. I am looking
for any and all information that anyone may have....
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
|
|
|