Subject: | |
From: | |
Date: | Wed, 31 Jul 96 09:04:36 cst |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hi Jan!
I can't begin to list the bismuth references that would help you out
but I can fill in some info. Bismuth solders have been used around the
industry for a long time. Most of the uses have been in select
applications and not on a broad scale. Roger Wild of IBM lead the
charge with implementing a wave soldering operation with 42Sn/58Bi and
I think it was Unisys in Minneapolis that was doing a similar process
on a huge (30 some layer) computer mother board. I have not heard of
any other "mass" operations. One drawback of using a Bi alloy is that
if you solder to a surface that contains lead (Pb) you have a chance
of forming a Pb/Sn/Bi phase that melts at 96C resulting in
"hotshortness" which makes the solder joints go to pieces. The NCMS
Lead Free Study that will be published soon has some great information
on the performance of Bi alloys with both thermal cycling and process
data. I can't disclose those results prior to the release of their
report but let's just say bismuth can cause you some serious problems
under different conditions. I know of several applications of alloys
50Sn/40Pb/10Bi and 43Pb/43Sn/14Bi that are working very well but one
caveat - the max temperature the assembly is exposed to is 95C. Give
me a call and we can discuss the topic of Bi further.
Dave Hillman
Rockwell Collins
[log in to unmask]
319-295-1615
______________________________ Reply Separator _________________________________
Subject: ASSY: Bismuth Solder
Author: [log in to unmask] at ccmgw1
Date: 7/30/96 5:39 PM
We have a customer who wants to use Bismuth solder (20% bismuth, 40% tin,
40%lead) on one of our products. He wants to solder a stranded wire to a
thin silver surface (commercial job) and believes that the lower melting
temp of bismuth solder will aid his process (we normally recommend SN62).
He asks if I know of any problems with bismuth attacking silver. (if it
has any sulphur in it, it will). I have never used bismuth solder and don't
recall reading anything recently about it. Has anyone had any experience
with it and what are the drawbacks if any?? Thanks.
Jan Satterfield
Edo Corp
[log in to unmask]
(801) 486-7481 ext 315
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
|
|
|