 
| Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0uFRgg-00007YC; Fri, 3 May 96 15:42 CDT |
| Old-Return-Path: |
|
| Date: |
Thu, 2 May 96 16:16:12 PDT |
| Precedence: |
list |
| X-Loop: |
|
| Resent-Sender: |
|
| X-Status: |
|
| Status: |
O |
| X-Mailing-List: |
|
| TO: |
|
| Return-Path: |
<TechNet-request> |
| From [log in to unmask] Fri May 3 18: |
08:50 1996 |
| Resent-Message-ID: |
<"vsbio3.0.RA4.A_cYn"@ipc> |
| Subject: |
|
| From: |
|
| Resent-From: |
|
| Message-Id: |
|
| Parts/Attachments: |
|
|
I have a customer specification requirement to inspect solder coating
thickness per IPC-D-949 Class 2. I reviewed the Design Guide and did not
find any solder coat thickness requirements.
Where in this IPC spec is the solder coat thickness requirements?
What is the relationship of IPC-D-949 and IPC-D-275?
If I use the solder coat thickness in IPC-D-275, do I meet the
requirements of IPC-D-949?
Your help is appreciated.
Randy Reed
Merix Corporation
[log in to unmask]
|
|
|
