 
| Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0uEPZg-00007YC; Tue, 30 Apr 96 19:15 CDT |
| Old-Return-Path: |
|
| From [log in to unmask] Wed May 1 16: |
33:07 1996 |
| Precedence: |
list |
| Resent-From: |
|
| Resent-Sender: |
|
| X-Status: |
|
| Status: |
O |
| X-Mailing-List: |
|
| TO: |
|
| Return-Path: |
<TechNet-request> |
| Resent-Message-ID: |
<"r_Oxd3.0.tBJ.NqgXn"@ipc> |
| Subject: |
|
| From: |
|
| X-Loop: |
|
| Message-ID: |
|
| Date: |
Tue, 30 Apr 1996 20:20:08 -0400 |
| Parts/Attachments: |
|
|
Joe, try experimenting with your feed first ( reduce it) and then with rpm
(again reduce it) The combination of speed and feed affects nailheading.
Copper is short of getting punched rather cut and too much heat is generated
making copper soft. Let me know of your success.
Pratap Singh
RAMP Labs
|
|
|
