TECHNET Archives

1996

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Received:
by ipc.org (Smail3.1.28.1 #2) id m0trrI5-0000DXC; Wed, 28 Feb 96 13:11 CST
Content-Type:
text/plain; charset="us-ascii"
Old-Return-Path:
<simon.ipc.org!nicmad.nicolet.com!nicmad.nicolet.com!mcguine>
Date:
Wed, 28 Feb 1996 13:11:40 -0600
Precedence:
list
Resent-From:
Resent-Sender:
X-Status:
Status:
O
X-Mailing-List:
<[log in to unmask]> archive/latest/2927
X-Sender:
TO:
Return-Path:
X-Loop:
Resent-Message-ID:
<"FTmxu1.0.Tm2.zZADn"@ipc>
Subject:
From:
[log in to unmask] (Pat McGuine)
From [log in to unmask] Wed Feb 28 15:
50:59 1996
Mime-Version:
1.0
X-Mailer:
Windows Eudora Version 1.4.4
Message-Id:
Parts/Attachments:
text/plain (45 lines)
We always design using the Maximum Material Conditions (MMC).  In doing so,
I can just use the values of X, Y and C specified.  One note of caution,
always check that the mechanical dimensions specified by the supplier match
those that the land pattern was developed around.

At 12:40 2/28/96 EDT, Jeff Seeger wrote:
>
>
>	Pat,
>
>	Good to hear your endorsement of the IPC land patterns.  We have
>	found good acceptance of them in the general assembly community.
>
>	I'm always glad to hear of "paths to higher yield".  Given your
>	testimonial I'd be curious to hear more specifically how you've
>	implemented the spec, though.  In your interpretation of IPC 782
>	(I assume it's rev A), do you use the nominal values presented or
>	do you envelope broader tolerances?  Perhaps you start with the
>	nominals and adjust for your process within the broader tolerances?
>
>	I have found this particular version to be a bit subject to the
>	user.  Nominal values are aggressive compared to factory specific
>	specs that we also support, while the full envelope presented is
>	too conservative for complex products.  Is your interpretation
>	part of your success?
>
>	Long live TechNet!
>
>	Jeff Seeger				Applied CAD Knowlege Inc
>	Chief Technical Officer			      Tyngsboro MA 01879
>	[log in to unmask]				    508 649 9800
>
>
>

-Pat-

-------------
Patrick McGuine
Nicolet Instrument
[log in to unmask]
(608) 276-6334



ATOM RSS1 RSS2