Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0vcZZ3-0000SHC; Tue, 24 Dec 96 10:18 CST |
Old-Return-Path: |
|
Date: |
Tue, 24 Dec 96 11:27:55 EST |
Precedence: |
list |
Resent-From: |
|
Resent-Sender: |
|
X-Status: |
|
Status: |
O |
X-Mailing-List: |
|
TO: |
|
From [log in to unmask] Mon Dec 30 08: |
28:00 1996 |
Return-Path: |
<TechNet-request> |
Resent-Message-ID: |
<"z_-6O.0.iYI.d90mo"@ipc> |
Subject: |
|
From: |
|
X-Loop: |
|
Message-Id: |
|
Parts/Attachments: |
|
|
Copper sulfate can be used to clean the brightener line of any fungus.
MB
______________________________ Reply Separator _________________________________
Subject: Fwd: Re: Copper plating
Author: [log in to unmask] at SMTPLINK-HADCO
Date: 12/23/96 06:23 PM
--WebTV-Mail-416189277-148
Content-Type: TEXT/PLAIN; CHARSET=US-ASCII
Content-Transfer-Encoding: 7BIT
A typo on this message. My final question was supposed to read like
this.
Somebodt at one time suggested adding a small amount of copper sulfate
to the brightner batch which is being added to the baths to prevent
fungus or algae from growing in the lines, what are your comments?
T. Gaylor
--WebTV-Mail-416189277-148
Content-Type: MESSAGE/RFC822
Content-Transfer-Encoding: 7BIT
Resent-Date: Mon, 23 Dec 1996 13:16:03 -0800
Resent-Sender: [log in to unmask]
Old-Return-Path: <[log in to unmask]>
Date: Mon, 23 Dec 1996 10:29:39 -0800 (PST)
Message-Id: <[log in to unmask]>
From: [log in to unmask] (Timothy Gaylor)
To: [log in to unmask]
Subject: Re: Copper plating
Content-Type: TEXT/PLAIN; CHARSET=US-ASCII
Content-Transfer-Encoding: 7BIT
MIME-Version: 1.0 (WebTV 1.0)
Resent-Message-ID: <"1musg1.0.P0J.jrilo"@ipc>
Resent-From: [log in to unmask]
X-Mailing-List: <[log in to unmask]> archive/latest/8801
X-Loop: [log in to unmask]
Precedence: list
Resent-Sender: [log in to unmask]
We have since the beginning of this problem, have changed out the
brightner lines and replaced them with new lines.As they were coated on
the inside with black (assuming fungus). The new lines were installed
inside black conduit tubing. The tubing was for the idea that the fungus
was growing from light exposure.
The size of the nodules are around .1 to .2mil, extremely small in fact,
too small too cross section and evaluate.
Sombody recommended at one time to add a small amount of copper sulfate
solution, do you have any comments on this?
T. Gaylor
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
--WebTV-Mail-416189277-148--
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|