 
| Mime-Version: |
1.0 |
| Content-Type: |
text/plain; charset=US-ASCII |
| Old-Return-Path: |
|
| Date: |
19 Dec 96 13:05:51 -0500 |
| Precedence: |
list |
| Resent-From: |
|
| Resent-Sender: |
|
| Content-Transfer-Encoding: |
7bit |
| Status: |
O |
| X-Mailing-List: |
|
| TO: |
|
| Return-Path: |
<TechNet-request> |
| X-Status: |
|
| From [log in to unmask] Mon Dec 23 12: |
07:08 1996 |
| X-Loop: |
|
| Resent-Message-ID: |
<"0xdt_2.0.h_A.OcOko"@ipc> |
| Subject: |
|
| From: |
|
| Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0vanE9-0000TYC; Thu, 19 Dec 96 12:29 CST |
| Sender: |
|
| X-Mailer: |
<UGate 2.10> |
| Message-Id: |
|
| Parts/Attachments: |
|
|
Hi Technet,
I need some information about wave solder fixtures. Is it better to glue
SMT parts on the bottom of the board and wave solder them along with the
through hole parts or to solder all SMT first, and then attach a solder
fixture to cover the SMT, and then wave solder through hole.
Thanks for any help.
Barry Darnell
(864)627-8800 Ext. 231
[log in to unmask]
Computer Dynamics, Inc.
Printed Circuit Board Designer
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|
