 
| Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0vakv8-0000UpC; Thu, 19 Dec 96 10:02 CST |
| Encoding: |
38 Text |
| Old-Return-Path: |
|
| Date: |
Thu, 19 Dec 96 10:09:59 CDT |
| Precedence: |
list |
| Resent-From: |
|
| Resent-Sender: |
|
| X-Status: |
|
| Status: |
O |
| X-Mailing-List: |
|
| TO: |
|
| Return-Path: |
<TechNet-request> |
| From [log in to unmask] Mon Dec 23 12: |
05:13 1996 |
| Resent-Message-ID: |
<"kkOts3.0.lqA.pQMko"@ipc> |
| Subject: |
|
| From: |
|
| X-Loop: |
|
| Message-Id: |
|
| Parts/Attachments: |
|
|
Look at the Accel cleaning system. It spins the parts and pushes/pulls
the crud from the tight spots. I believe they are in Plano (Dallas)
Texas.
______________________________ Reply Separator _________________________________
Subject: SMT Cleaning
Author: [log in to unmask] at Internet
Date: 12/19/96 10:00 AM
I'm working on developing a cleaning process for SMT. One of the
challenges on the product is very low part clearances. In many cases,
the devices are mounted only 1 to 3 mils from the board. Some devices
also have their bodies soldered to the substrate to provide an RF
ground. The substrates are ceramic, and the soldering process is IR
reflow.
Right now we are cleaning by hand in Axarel 2200. This is time
consuming and marginally effective. I'm looking for a faster, more
effective process. Any suggestions?
Thanks,
Kathie Lambert
Northrop Grumman
410-765-9746
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|
