Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0vaInK-0000V1C; Wed, 18 Dec 96 04:00 CST |
Lines: |
24 |
Old-Return-Path: |
|
Date: |
Wed, 18 Dec 1996 09:28:54 GMT |
Precedence: |
list |
Reply-To: |
|
Resent-Sender: |
|
X-Status: |
|
Status: |
O |
X-Mailing-List: |
|
TO: |
|
Return-Path: |
<TechNet-request> |
X-Loop: |
|
Resent-Message-ID: |
<"sCWLs2.0.swS.W1yjo"@ipc> |
Subject: |
|
From: |
|
From [log in to unmask] Wed Dec 18 08: |
24:36 1996 |
Resent-From: |
|
X-Mailer: |
PCElm 1.10 |
Message-Id: |
|
Parts/Attachments: |
|
|
In message <[log in to unmask]> Victor Li writes:
> I have seen some SMT components laying on circuits on a sheet of plastic,
> which can be folded and saves some space. I also heard that cellular phone
> or camera uses this kind of circuit board due to the limited space available.
>
> My question is : how do they solder the components onto it? Normal
> reflow? Would it go through the 200C without damage? What is the
> material of it?
Flexible circuits are big business. The orange coloured film is polyimide,
which goes under the brand name of Kapton. It is a DuPont product. Components
may be soldered on using conventional print and reflow, although tooling can be
a bit tricky. The film stands up to the temperature pretty well - it's the same
stuff used in high temperature wave solder masking tape.
Peter
--
...............................................................................
Peter Swanson Oxfordshire, England
INTERTRONICS
[log in to unmask] Compuserve: 100120,3641
http://ourworld.compuserve.com/homepages/Peter_Swanson
Experience is what you get when you were expecting something else.
...............................................................................
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|