Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0vYc2p-0000W7C; Fri, 13 Dec 96 12:09 CST |
Old-Return-Path: |
|
Date: |
Fri, 13 Dec 1996 11:13:06 +600 CDT |
Precedence: |
list |
Resent-From: |
|
Resent-Sender: |
|
X-Status: |
|
Status: |
O |
From [log in to unmask] Fri Dec 13 13: |
36:45 1996 |
TO: |
|
Return-Path: |
<TechNet-request> |
X-Loop: |
|
X-Mailing-List: |
|
X-Mailer: |
Pegasus Mail v3.40 |
Resent-Message-ID: |
<"5k2Ex.0.iGP.4lPio"@ipc> |
Subject: |
|
From: |
|
X-Confirm-Reading-To: |
|
Priority: |
normal |
Organization: |
CompuRoute, Inc. |
Message-Id: |
|
Parts/Attachments: |
|
|
Does anyone know of a company that provides stand alone small
hole drilling services?
We need to have .008" diameter holes drilled on .125" thick 8-layer
MLBs, with .016" diameter plane clearances and .004" wide spacing
between traces and drilled holes. The pattern is that of a microBGA
device with a .5 mm pitch and 176 holes. Internally, each hole will
either connect directly to a plane or to a trace pad.
Material is either FR-4 or polyimide. All copper weights are .5 oz
copper.
Many thanks,
Luis Rivera
CompuRoute, Inc.
Dallas, TX
[log in to unmask]
(214) 340-0543
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|