 
| Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0vYL34-0000UEC; Thu, 12 Dec 96 18:00 CST |
| Encoding: |
52 Text |
| Old-Return-Path: |
|
| Date: |
Thu, 12 Dec 96 17:02:20 cst |
| Precedence: |
list |
| Resent-From: |
|
| Cc: |
|
| X-Status: |
|
| Status: |
O |
| From [log in to unmask] Fri Dec 13 12: |
49:30 1996 |
| TO: |
|
| Return-Path: |
<TechNet-request> |
| Resent-Message-ID: |
<"lEqGZ3.0.UtB.9o9io"@ipc> |
| Subject: |
|
| From: |
|
| X-Loop: |
|
| X-Mailing-List: |
|
| Resent-Sender: |
|
| Message-Id: |
|
| Parts/Attachments: |
|
|
Give Contamination Studies Labs a call (Doug Pauls, [log in to unmask]).
Indiana isn't as close as you want but they do a good job.
Dave Hillman
Rockwell Collins
[log in to unmask]
______________________________ Reply Separator _________________________________
Subject: FAB: Independent Lab for Board Residue Analysis
Author: [log in to unmask] at ccmgw1
Date: 12/12/96 3:53 PM
Problem: Our customer is performing elevated temperature
and humidity testing way above Bellcore limits. They
are driving right up to 70C/95rh for more than a week.
Besides my protest to this, they are noticing white
spots on one end of the board. This condition does
not and has not appeared any other time.
The customer is requiring us to have our board
house analyze possible residue on our stuffed and
populated pcb. My company is in CT. We make telco
equipment. We are not a board fab/assy house.
We agreed to Class 2 but they are going above and
beyond Class 3.
Any good labs in the immediate CT area that does pcb chem
residue analysis?
Thanks in advance.
*******************************************************
-------------------------------------------------------
The comments and opinions stated herein are mine alone,
and do not reflect those of my employer.
-------------------------------------------------------
*******************************************************
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|
