Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0vYCp6-0000SmC; Thu, 12 Dec 96 09:13 CST |
Old-Return-Path: |
|
Date: |
Thu, 12 Dec 1996 08:46:50 -0500 |
Precedence: |
list |
Resent-From: |
|
Resent-Sender: |
|
X-Status: |
|
Status: |
O |
X-Mailing-List: |
|
TO: |
|
Return-Path: |
<TechNet-request> |
From [log in to unmask] Thu Dec 12 16: |
02:28 1996 |
Subject: |
|
From: |
|
Resent-Message-ID: |
<"Rst3W.0.e2R.E42io"@ipc> |
X-Loop: |
|
Message-ID: |
|
Parts/Attachments: |
|
|
In a message dated 96-12-11 13:12:37 EST, you write:
<< I would like to find out what type of connector is required to
mate with the edge connect fingers of IPC SIR test coupons. I would
like to use both the B36 as well as the B25A type.
Any help would be appreciated
>>
There will have to be two different connectors. The B-36 has 32 contact pads
on each side, the B25A has 22. In my system, I use an AMP connector for the
B-36 board. The part number is 1-111212-1. I have gotten mine most recently
from LinTech Components (516-563-3000, Denise Latkowski). They run about $9
each, depending on quantity and are usually a long lead time (8 weeks) item.
As these are insulation displacing connectors, you will also need teflon
insulated ribbon cable. My supply has been Aerospace Computer Products
(800-234-4725, Mike Townes).
I have not yet determined a suitable connector for the B-25A.
Doug Pauls
CSL
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|