 
| Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0tpIqL-0000iAC; Wed, 21 Feb 96 12:00 CST |
| Content-Type: |
TEXT/PLAIN; charset=US-ASCII |
| Old-Return-Path: |
<buetmi> |
| Date: |
Wed, 21 Feb 1996 12:00:41 -0600 (CST) |
| Precedence: |
list |
| Resent-From: |
|
| cc: |
|
| MIME-Version: |
1.0 |
| Status: |
O |
| From [log in to unmask] Mon Feb 26 12: |
31:10 1996 |
| TO: |
|
| Return-Path: |
|
| X-Status: |
|
| Resent-Sender: |
|
| Resent-Message-ID: |
<"yakNN3.0.QAF.CtrAn"@ipc> |
| Subject: |
|
| From: |
|
| X-Loop: |
|
| In-Reply-To: |
|
| X-Mailing-List: |
|
| Message-ID: |
<Pine.3.89.9602211142.C57222-0100000@ipc> |
| Parts/Attachments: |
|
|
Someone added an extra 7. IPC-A-600, Rev. E, was published August 1995.
It is a workmanship document for bare board acceptability, which includes
conductor plating. Gold fingers are covered by IPC-A-610, Rev. B,
published 12/94.
Both documents are available from IPC, ext. 318.
Mike Buetow
IPC Technical Staff
2215 Sanders Road
Northbrook, IL 60062
P: 847-509-9700, ext. 335
F: 847-509-9798
[log in to unmask]
On Wed, 21 Feb 1996 [log in to unmask] wrote:
>
> Is there a spec out there like this regarding gold plating or did
> somebody add an extra (7)?
>
>
> Dave (Groovy)
>
>
|
|
|
