Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0vW20C-0000Y7C; Fri, 6 Dec 96 09:15 CST |
Encoding: |
40 Text |
Old-Return-Path: |
|
Date: |
Fri, 06 Dec 96 08:46:40 cst |
Precedence: |
list |
Resent-From: |
|
Cc: |
|
X-Status: |
|
Status: |
O |
X-Mailing-List: |
|
TO: |
|
Return-Path: |
<TechNet-request> |
Resent-Message-ID: |
<"_mYbI1.0.yNJ.XY3go"@ipc> |
Subject: |
|
From: |
|
X-Loop: |
|
From [log in to unmask] Fri Dec 6 15: |
26:06 1996 |
Resent-Sender: |
|
Message-Id: |
|
Parts/Attachments: |
|
|
Hi Stew -
Are your MELF components glass bodied? Are you doing something
"special" in the process to avoid thermal shock damage.
Dave Hillman
Rockwell Collins
[log in to unmask]
______________________________ Reply Separator _________________________________
Subject: Re: ASSY: MELF's
Author: [log in to unmask] at ccmgw1
Date: 12/6/96 8:43 AM
We've been wave-soldering MELF and SOD80/SOD87 pkgs in large qty's
for about 5 years now. We've had little problem with alignment, using
square pads. The biggest problem we've had is bridging - mostly due
to board density being much higher than ideal. (By large qty, I mean
over 1 million units/yr, with about 8 diodes per unit)
Stew Benedict, CAD Specialist, GE Lighting, Cleveland OH
[log in to unmask]
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|