Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0vViVW-0000V1C; Thu, 5 Dec 96 12:26 CST |
Encoding: |
44 Text |
Old-Return-Path: |
|
Date: |
Thu, 05 Dec 96 12:05:47 cst |
Precedence: |
list |
Resent-From: |
|
Resent-Sender: |
|
X-Status: |
|
Status: |
O |
X-Mailing-List: |
|
TO: |
|
Return-Path: |
<TechNet-request> |
From [log in to unmask] Fri Dec 6 12: |
07:06 1996 |
Resent-Message-ID: |
<"MZ4JO3.0.5KB.eFnfo"@ipc> |
Subject: |
|
From: |
|
X-Loop: |
|
Cc: |
|
Message-Id: |
|
Parts/Attachments: |
|
|
Hi Victor -
Thermal mass relating to....? Process assembly profiles, thermal
design simulation, rework, etc. Please provide some additional detail.
Dave Hillman
Rockwell Collins
[log in to unmask]
______________________________ Reply Separator _________________________________
Subject: gen: thermal mass
Author: [log in to unmask] at ccmgw1
Date: 12/5/96 11:14
Hi,
How do people claim the existence of thermal mass issue?
Say if I have a PWA with large and small components. Do I measure the
surface temperature of those components and relate the issue to the
temperature discrepancy? OR do I measure the temperature underneath the lead
(or even the bottom of the components)?
Thank you very much.
Regards,
Victor
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|