Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0vVQ8W-0000WgC; Wed, 4 Dec 96 16:49 CST |
Old-Return-Path: |
|
Date: |
Wed, 4 Dec 96 23:49:35 PST |
Precedence: |
list |
Resent-From: |
|
From [log in to unmask] Wed Dec 4 17: |
05:37 1996 |
Resent-Sender: |
|
X-Status: |
|
Status: |
O |
X-Mailing-List: |
|
TO: |
|
Return-Path: |
<TechNet-request> |
Resent-Message-ID: |
<"rZ8_v3.0.-2H.90Wfo"@ipc> |
Subject: |
|
From: |
|
X-Loop: |
|
Reply-To: |
|
Message-Id: |
|
Parts/Attachments: |
|
|
hi,
one of my customers have built a 4 layers board as follows:
____________________________18 MIC COOPER (1/2 oz)
========================
======================== 3 X 7628
========================
---------vcc-------35 mic cooper (1 oz)
0.711mm CORE
----------gnd-------35 mic cooper
SAME AS ABOVE
with multifunctional resin type materials, it's tg is 140 c.
the end-user of this board have not specified any controlled impedance
tracks , BUT some signals do carry 0.7 giga to up to 4 giga !!!
could someone advise what is the dk of the epoxy at those rates,
should other materials be used then std. epoxy resins (fr4 -gfn)
any comment would be appreciated.
Yisrael Leshman
Octava Marketing
zichron-yaakov
ISRAEL
[log in to unmask]
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|