Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0vSkYU-0000R6C; Wed, 27 Nov 96 08:01 CST |
Encoding: |
34 TEXT |
Old-Return-Path: |
|
Date: |
Wed, 27 Nov 96 09:08:00 PST |
Precedence: |
list |
Resent-From: |
|
Resent-Sender: |
|
X-Status: |
|
Status: |
O |
X-Mailing-List: |
|
TO: |
|
Return-Path: |
<TechNet-request> |
From [log in to unmask] Tue Dec 3 13: |
56:26 1996 |
Resent-Message-ID: |
<"1CT3z3.0.4DH.1d4do"@ipc> |
Subject: |
|
From: |
|
X-Loop: |
|
Cc: |
|
X-Mailer: |
Microsoft Mail V3.0 |
Message-Id: |
|
Parts/Attachments: |
|
|
At the end of the PTH line, after the acid dip and rinse, put in an
anti-tarnish and DI rinse. Then the boards must be DRIED completely before
any stacking or before df lamination. Most electroless copper suppliers
also supply an anti-tarnish for this purpose. An alternative would be a
separate, small conveyorized line consisting of 5% sulfuric
acid/rinse/anti-tarnish/rinse/ dryer, that would feed right into the df
lamination area. I believe the anti-tarnishes are mostly benzotriazole
types.
Patty
----------
From: Eltek Ltd. - Process Engineering
To: technet
Subject: Thick Electroless
Date: Tuesday, November 26, 1996 8:10AM
Hello Technet !
We intend to switch our PTH process from thin copper electroless plus
electrolytic strike to thick ( hot ) electroless , 2 microns thick . The
line will be loaded with baskets , so we do expect the PCBs will be
oxidized.We are considering some kind of chemical treatment prior to dry
film lamination instead of pumice scrub.Wjhat kind of treatment is
recommended ?
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To unsubscribe from this list at any time, send a message to: *
* [log in to unmask] with <subject: unsubscribe> and no text. *
***************************************************************************
|
|
|