 
| Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0totNH-0000AxC; Tue, 20 Feb 96 08:49 CST |
| Old-Return-Path: |
|
| Date: |
20 Feb 96 09:51:22 EST |
| Precedence: |
list |
| X-Loop: |
|
| Resent-Sender: |
|
| X-Status: |
|
| Status: |
RO |
| X-Mailing-List: |
|
| TO: |
|
| Return-Path: |
|
| Resent-Message-ID: |
<"zUJD_.0.VAE.UzTAn"@ipc> |
| Subject: |
|
| From: |
|
| Message-ID: |
|
| Resent-From: |
|
| From [log in to unmask] Tue Feb 20 16: |
56:08 1996 |
| Parts/Attachments: |
|
|
Elexsys International Inc. has the
following Engineering openings at our
Nashua, New Hampshire facility.
PROCESS ENGINEER, NC DRILL
Candidate should possess three plus
years of NC Drill Process Engineering
experience within a printed circuit
board manufacturing facility.
Responsibilities will include:
Process improvements and development
within our Drill/Fab and
Multilayer Departments.
PROCESS ENGINEER, ELECTRICAL TEST, CAET
Candidate must have three plus years
experience and proven technical ability
within a PC board manufacturing
facility.
Responsibilities include:
Process improvement and development
New equipment process development
Debug CAD netlist problems
Fixture design and development
Test equipment troubleshooting
Send resume to:
Elexsys International Inc.
Attn.: Human Resources Dept.
41 Simon St.
Nashua, NH 03060
(603)-886-0066
Elexsys International Inc. is an equal
opportunity employer.
|
|
|
